HOME > 제품소개 > 레벨센서 > Echomax XLS and XLT Transducers 
앞으로도 양질의 제품공급에 최선의 노력을 다하겠습니다.
http://woojininst.co.kr 우진계측기(주)
Product Features
● Sealed aluminium face
● Built-in temperature sensor
● Self-cleaning and low maintenance
● 2-wire interconnection
● Simple installation
| XLT-30 | XLT-60 | XLS-60 | |
|---|---|---|---|
| Range | 0.9 to 30m(3 to 100ft) | 1.8 to 60m(6 to 200ft) | 1.8 to 60m(6 to200ft) |
| Frequency | 22kHz | 13kHz | 13kHz |
| Beam Angle | 5° | 5° | 5° |
| Environmental | |||
| *Location | indoor/outdoor | indoor/outdoor | indoor/outdoor |
| *Altitude | 2000m maximum | 2000m maximum | 2000m maximum |
| *Ambient Temp. | -40 to 150℃(-40 to 300℉) | -40 to 150℃(-40 to 300℉) | -40 to 90℃(-40 to194℉) |
| *Pollution Degree | 4 | 4 | 4 |
| Construction | |||
| Material | Aluminium, 304 stainless steel, polyester and silicone, painted red | Aluminium, 304 stainless steel, polyester and silicone, painted red | Aluminium, 304 stainless steel, polyester and silicone, painted gray |
| *Mounting | 1" NPT conduit connection | 1" NPT conduit connection | 1" NPT conduit connection |
| *Cable | 2
Wire shielded/twisted,0.5㎟(20 AWG) silicon jacket |
2 Wire shielded/twisted,0.5㎟(20 AWG) silicon jacket | 2 Wire shielded/twisted,0.5㎟(20 AWG) PVC jacket |
| Weight(with standard cable length) | 4.3kg(9.5 lbs.) | 6.6kg(14.5 lbs.) | 6.6kg(14.5 lbs.) |
| Supply Source | Transducer shall only be supplied by Milltronics certified controllers. | Transducer shall only be supplied by Milltronics certified controllers. | Transducer shall only be supplied by Milltronics certified controllers. |
| Separation | 365m(1200ft) | 365m(1200ft) | 365m(1200ft) |
| Approvals | CE, CSA/ FM/ SIRA/CENELEC | CE, CSA/ FM/ SIRA/CENELEC | CE, CSA/ FM/ SIRA/CENELEC |
Range specifications are "typical". Actual range is dependent upon installation conditions. Maximum power is radiated axially(perpendicular) from the transducer face in a line referred to as the axis of transmission. Where power is reduced by half(-3dB), a conical boundry defining the sound beam, centered about the axis of transmission, is established.
Specifications are subject to chande without notice.
